having trouble building lather
having trouble building lather
I've moved from my tobs cream to try out some soap. Col. Conk to be exact. The first time the lather came out a bit thin, so my second shave I shook out my brush a few extra times. So now using less water, I figured I would not move to a mug, but actually build right on the soap in the bowl. I swirled and swirled and swirled, adding just a couple drops of water in between. I must have spent 4 to 5 minutes doing this but still not the rich lather I want. Needless to say my shave was just sub-par. I realize it takes time to this craft, but if anyone knows from experience with this soap; is this what I can expect from conk? I know many of you will say it takes time, and I agree. So maybe this was just me venting.
thanks for the time, happy shaving
Jake.
thanks for the time, happy shaving
Jake.
The difference between genius and stupidity is that
genius has it's limits. ---Albert Einstein
genius has it's limits. ---Albert Einstein
-
- Assistant Dean SMFU
- Posts: 9449
- Joined: Mon Apr 18, 2005 10:32 am
- Location: Vancouver, BC
The lather from this type of soap never gets sudsy and thick in the same way that Taylor's cream does. Expect it to be perhaps a bit thin-looking but quite slippery and effective. Some people like this style of soap a lot, others not so much.
I suspect (almost certain) from what you say that you actually had far far too much soap on your brush and that's why it didn't work.
- Don't lather on the soap, it doesn't work consistently. Either on your face, or in a separate container. (where "separate container" may even mean your other hand if you desire)
- Wet the brush thoroughly, then shake it out so there's just a little water left - you'll have to experiment with that as each brush is a bit different. If you had a good thing going with Taylor's cream, then start with the same water as that and adjust next time if necessary.
- Take a reasonable number of brush strokes on the soap, say between five and twenty. Time-on-soap is most definitely measured in seconds and not minutes.
- Work that up and see how it's turning out. Add a little water or a little more soap if necessary. If it's terrible, rinse it down the drain and try again.
I suspect (almost certain) from what you say that you actually had far far too much soap on your brush and that's why it didn't work.
- Don't lather on the soap, it doesn't work consistently. Either on your face, or in a separate container. (where "separate container" may even mean your other hand if you desire)
- Wet the brush thoroughly, then shake it out so there's just a little water left - you'll have to experiment with that as each brush is a bit different. If you had a good thing going with Taylor's cream, then start with the same water as that and adjust next time if necessary.
- Take a reasonable number of brush strokes on the soap, say between five and twenty. Time-on-soap is most definitely measured in seconds and not minutes.
- Work that up and see how it's turning out. Add a little water or a little more soap if necessary. If it's terrible, rinse it down the drain and try again.
-
- Duke of Silvertip!
- Posts: 27393
- Joined: Sun Feb 27, 2005 1:02 pm
Jake, I agree with NTS; cold pour soaps like that are not going to give you the same type of lather that you can get with a cream like Taylors. To get close to that, with a hard soap, you would have to go to one of the top end triple milled specimens, like Trumpers. They are capable of producing a lather quite similiar ( although not the same ) as the classic creams.
Regards,
Gordon
Regards,
Gordon
Hi Jake. This is good advice from the others. My contribution would only be to practice. Not to shave, not putting it on your face unless you just want to for some reason, just practicing with the soap and the brush, and probably the best for practice is to make the lather in your other hand. I am here to testify that I've learned a lot about lathering by a lot of practicing with the different and new soaps that might have been causing some trouble. Any time that's convenient, all you gotta do then is rinse it off your hands. Plus, it gives you a chance to examine the lather up close, and being able to get a sense about the thickness of the lather because you can rub it between your hands while you're practicing.
Gary
SOTD 99%: Monday, Wednesday, and Friday, soaps & creams, synthetic / badger brushes, Colonial General razor, Kai & Schick blades, straight razors any time, Superior 70 aftershave splash + menthol + 444
SOTD 99%: Monday, Wednesday, and Friday, soaps & creams, synthetic / badger brushes, Colonial General razor, Kai & Schick blades, straight razors any time, Superior 70 aftershave splash + menthol + 444
-
- Assistant Dean SMFU
- Posts: 9449
- Joined: Mon Apr 18, 2005 10:32 am
- Location: Vancouver, BC
I had a shave stick from QED a few years ago. It was a similar type of soap though perhaps somewhat nicer than Conk. It shaved great - I just had to not stare at the lather while I was making it as it "looked wrong" even when it was perfect. I remember taking that stick on a trip somewhere and getting better shaves than at home. There is a good feel to it when you get it right, even though it looks different. It's not rocket science, as they say - with a normal/reasonable amount of water and a normal/reasonable amount of soap, it works fine.
I generally recommend that a new soap shaver start with a shave stick and build the lather on his beard. Reason: a shave stick will put enough soap on the beard (that is, as your rub the stick against the grain all over your wet beard, your beard will scrape off the right amount of soap). Then you wet your brush, one small shake, and brush your beard vigorously. Sometimes a small dribble of water might be needed in the middle of the brush, sometimes not.
Try a D.R. Harris shave stick, for example: a terrific soap and a great lather.
I have not had great success with Col. Conk, FWIW.
Try a D.R. Harris shave stick, for example: a terrific soap and a great lather.
I have not had great success with Col. Conk, FWIW.
- Lord Ponsenberry Smyth
- Posts: 242
- Joined: Wed Feb 03, 2010 5:43 am
- Location: The Colony of Australia.
LOLjww wrote:I have never been a dab hand with cold-pour soaps so decided to give it up. It's not that I can't get the lather to build, it's more that I don't like the feel of the lather from a cold-pour soap.
But ----
Give MWF a try!
Toooo Silly !!!!
So it's try MWF or back to the TOBS.
David Ponsenberry Smyth 111. ( Lord )
Advocate for the use of French and Italian soaps.
________________________________
Far from the madding crowd's ignoble strife.
Advocate for the use of French and Italian soaps.
________________________________
Far from the madding crowd's ignoble strife.
I've never used glycerin soaps or non tallow soaps. I mean I have one I think, but have not used it.
With any soap it would be my guess that loading the brush from the puck with good amount would be what is needed. If the brush contains too much water, that would not happen?
There are shave stick users and bowl latherers who build their lather on a bowl for optimum. They are the 2 exreme school latherers.
Most of us are face lathers that sure build some sort of preload of soap on the almost "dry" shaken brush. And then go to build that optimum lather on face. Dipping one or 2 times to sink with the process. And most importantly finish the lather with paint brush style to finish the creamy pasture. No bubbles to be seen and not too much water in the lather.
Boar brushes are a bit wierd, so above advice dont apply to them.
Hope this helps,
Jarmo
With any soap it would be my guess that loading the brush from the puck with good amount would be what is needed. If the brush contains too much water, that would not happen?
There are shave stick users and bowl latherers who build their lather on a bowl for optimum. They are the 2 exreme school latherers.
Most of us are face lathers that sure build some sort of preload of soap on the almost "dry" shaken brush. And then go to build that optimum lather on face. Dipping one or 2 times to sink with the process. And most importantly finish the lather with paint brush style to finish the creamy pasture. No bubbles to be seen and not too much water in the lather.
Boar brushes are a bit wierd, so above advice dont apply to them.
Hope this helps,
Jarmo
Jarmo
-
- Assistant Dean SMFU
- Posts: 9449
- Joined: Mon Apr 18, 2005 10:32 am
- Location: Vancouver, BC
Jarmo - I think you are right.
I just wanted to say I love your phrase "the creamy pasture". I know exactly what you wanted to say - but "pasture" only means "the green field where the farmer lets the animals eat". Putting this idea together with shaving makes you better than a lot of poets. Thanks - my shave today will be much more interesting than it was yesterday.
I just wanted to say I love your phrase "the creamy pasture". I know exactly what you wanted to say - but "pasture" only means "the green field where the farmer lets the animals eat". Putting this idea together with shaving makes you better than a lot of poets. Thanks - my shave today will be much more interesting than it was yesterday.