Home Page | Gallery | PM Inbox | Forum Index  
 

Pin Maintenance

Use a straight. You know it makes sense.

Pin Maintenance

Postby Zot! » Thu Jun 06, 2013 6:03 am

I happened on Lynn's Pin Tightening Maintenance youtube http://www.youtube.com/watch?v=lb5dp6_JCMM and saw how to tighten up the pivot pin. I guess I have had my str8 long enough and I probably had some bad stropping habits holding the razor for a while. I hadn't thought of giving the pins some taps with a hammer, but I tried it and it worked like a charm. The scales were loose on one razor in particular that had a narrow opening and I had to be very careful closing it or the tip would hit the scales when I closed it. Also the stropping with the loose scales was a pain. Anyway, it is all better now.
Ron
Zot!
 
Posts: 2228
Joined: Sun Mar 02, 2008 9:42 am
Location: Inland Empire, California

Re: Pin Maintenance

Postby brothers » Sun Jun 09, 2013 9:00 pm

Ron, I recall Bill Ellis saying something like "get the biggest hammer you've got and hit that pin as hard as you can!" as a sarcastic comment about razors with bent pivot pins. I found a small jeweller's hammer at the flea market that seems to be just about perfect for the tap-tap-tap method of tightening up the pin.
Gary
brothers
 
Posts: 16845
Joined: Sun Sep 14, 2008 7:18 am
Location: Oklahoma City USA

Re: Pin Maintenance

Postby Churchill » Wed Jun 12, 2013 5:12 pm

Back of a sturdy spoon works pretty well too!
Bob
User avatar
Churchill
 
Posts: 1825
Joined: Wed Aug 22, 2007 6:48 am
Location: Jubail, Saudi Arabia

Re: Pin Maintenance

Postby pundi64 » Wed Nov 04, 2015 2:46 pm

Lynn Abrams on YouTube, in address giving in your thread starter, is the best answer, I've ever seen, I tried it works great, only thing I have changed, since I don't have a half dome hammer, is I used a regular small ball peen hammer. =D>
pundi64
 
Posts: 27
Joined: Thu Oct 29, 2015 12:29 am


Return to Straight Razors

Who is online

Users browsing this forum: No registered users and 2 guests