Shorter loft
Shorter loft
Gentlemen,
I have a TGN synthetic that I bought last year and installed in a vintage Ever Ready handle. I would like to remove the knot and mount it lower in the handle. Is there a safe way to do this where I don't destroy the knot?
I have a TGN synthetic that I bought last year and installed in a vintage Ever Ready handle. I would like to remove the knot and mount it lower in the handle. Is there a safe way to do this where I don't destroy the knot?
Bruce
Proverbs 3:5-6
Gig'em!
Proverbs 3:5-6
Gig'em!
-
- Posts: 3121
- Joined: Thu Sep 29, 2011 1:13 am
- Location: Central Maine
Re: Shorter loft
I can't help directly. Why not contact TGN and ask?
Brian
Maker of Kramperts Finest Bay Rum and Frostbite
Or find it here: Italian Barber, West Coast Shaving, Barclay Crocker, The Old Town Shaving Company at Stats, Maggard Razors; Leavitt & Peirce, Harvard Square
Maker of Kramperts Finest Bay Rum and Frostbite
Or find it here: Italian Barber, West Coast Shaving, Barclay Crocker, The Old Town Shaving Company at Stats, Maggard Razors; Leavitt & Peirce, Harvard Square
Re: Shorter loft
I suppose the main question is what did you use to glue it? There are a couple of SMF members who have posted about doing what you're asking about. Maybe one of those guys can be of help.
(Edit: vferdman and Oscar11, unless I am wrong.)
(Edit: vferdman and Oscar11, unless I am wrong.)
Gary
SOTD 99%: Monday, Wednesday, and Friday, soaps & creams, synthetic / badger brushes, Colonial General razor, Kai & Schick blades, straight razors any time, Superior 70 aftershave splash + menthol + 444
SOTD 99%: Monday, Wednesday, and Friday, soaps & creams, synthetic / badger brushes, Colonial General razor, Kai & Schick blades, straight razors any time, Superior 70 aftershave splash + menthol + 444
Re: Shorter loft
Good ideas. Thanks for the input.
Gary I used a 2 part epoxy from a syringe container, but I don't know the brand.
Gary I used a 2 part epoxy from a syringe container, but I don't know the brand.
Bruce
Proverbs 3:5-6
Gig'em!
Proverbs 3:5-6
Gig'em!
Re: Shorter loft
I have a suspicion, or an untested theory, that epoxy might be too permanent to change. I hope I'm wrong.
Gary
SOTD 99%: Monday, Wednesday, and Friday, soaps & creams, synthetic / badger brushes, Colonial General razor, Kai & Schick blades, straight razors any time, Superior 70 aftershave splash + menthol + 444
SOTD 99%: Monday, Wednesday, and Friday, soaps & creams, synthetic / badger brushes, Colonial General razor, Kai & Schick blades, straight razors any time, Superior 70 aftershave splash + menthol + 444
-
- Posts: 3121
- Joined: Thu Sep 29, 2011 1:13 am
- Location: Central Maine
Re: Shorter loft
Yikes! Forget asking TGN. The glue holding the knot together is likely not as durable as the epoxy that holds the knot in. You might wind up selling the brush and making a new brush. I hope the handle wasn't unique.
Brian
Maker of Kramperts Finest Bay Rum and Frostbite
Or find it here: Italian Barber, West Coast Shaving, Barclay Crocker, The Old Town Shaving Company at Stats, Maggard Razors; Leavitt & Peirce, Harvard Square
Maker of Kramperts Finest Bay Rum and Frostbite
Or find it here: Italian Barber, West Coast Shaving, Barclay Crocker, The Old Town Shaving Company at Stats, Maggard Razors; Leavitt & Peirce, Harvard Square
Re: Shorter loft
Well I've not seen another Ever Ready that's like this one, but I'm sure it's not that unique. I don't use it as often due to the lack of backbone so my thought was to drop it down a little further in the handle. Not sure if that would help or not. It makes a pretty good lather, but it's more for brushing than how one would normally use a brush. We shall see, worse case I can just use it for display I guess.
Bruce
Proverbs 3:5-6
Gig'em!
Proverbs 3:5-6
Gig'em!
Re: Shorter loft
And, as you said in the beginning, you can drill out the current knot, clear and dress the inside of the hole. Then you would have to buy a new knot for it of course.
Gary
SOTD 99%: Monday, Wednesday, and Friday, soaps & creams, synthetic / badger brushes, Colonial General razor, Kai & Schick blades, straight razors any time, Superior 70 aftershave splash + menthol + 444
SOTD 99%: Monday, Wednesday, and Friday, soaps & creams, synthetic / badger brushes, Colonial General razor, Kai & Schick blades, straight razors any time, Superior 70 aftershave splash + menthol + 444
Re: Shorter loft
Just curious, what size knot and what's the loft.
Re: Shorter loft
If memory serves me correctly it's a 20mm knot, but I don't remember the loft. It's not set very deep in the handle that I do remember. I did this one about a year ago, have used it sparingly, maybe a couple dozen times and about a week ago I gave it to a friend to see if he liked it.
Bruce
Proverbs 3:5-6
Gig'em!
Proverbs 3:5-6
Gig'em!
Re: Shorter loft
Here's an update for anyone interested. The friend that I loaned it to brought it back promptly as he had no luck with it either. In playing around with it I'm glad to report I was able to get it out without damaging the knot or the Ever Ready 500PB handle (this one from around 1950ish I believe). I have sunk it about a 1/4" deeper in the handle so I'll begin playing around with it soon to see if it works any better than before. Thanks for all of your suggestions and help with this.
Bruce
Proverbs 3:5-6
Gig'em!
Proverbs 3:5-6
Gig'em!
-
- Posts: 3121
- Joined: Thu Sep 29, 2011 1:13 am
- Location: Central Maine
Re: Shorter loft
Excellent! I hope you put it in there with some sort of temporary adhesive so that you could continue to adjust it.
Brian
Maker of Kramperts Finest Bay Rum and Frostbite
Or find it here: Italian Barber, West Coast Shaving, Barclay Crocker, The Old Town Shaving Company at Stats, Maggard Razors; Leavitt & Peirce, Harvard Square
Maker of Kramperts Finest Bay Rum and Frostbite
Or find it here: Italian Barber, West Coast Shaving, Barclay Crocker, The Old Town Shaving Company at Stats, Maggard Razors; Leavitt & Peirce, Harvard Square
Re: Shorter loft
Thanks for the positive update. I'm glad to hear it. Hope the brush improves with the reduction of the loft.
Gary
SOTD 99%: Monday, Wednesday, and Friday, soaps & creams, synthetic / badger brushes, Colonial General razor, Kai & Schick blades, straight razors any time, Superior 70 aftershave splash + menthol + 444
SOTD 99%: Monday, Wednesday, and Friday, soaps & creams, synthetic / badger brushes, Colonial General razor, Kai & Schick blades, straight razors any time, Superior 70 aftershave splash + menthol + 444
Re: Shorter loft
Brian no I didn't, I used the same epoxy just not as much and I figured I can get it out again if needed. Plus any deeper and it would look pretty bad as there wouldn't be much loft. Thanks again guys.
Bruce
Proverbs 3:5-6
Gig'em!
Proverbs 3:5-6
Gig'em!
- Ouchmychin
- Posts: 1595
- Joined: Sat Sep 30, 2006 12:03 pm
Re: Shorter loft
I was going to suggest that you just put a band around the bristles at the top of the handle to tighten them up. Even a rubber band will do for that.
Ouchmychin (Pete)
Re: Shorter loft
I had thought of that Pete. Since after some playing around I was able to get the knot out I went with the original plan.
Bruce
Proverbs 3:5-6
Gig'em!
Proverbs 3:5-6
Gig'em!
Re: Shorter loft
A couple of weeks ago someone found a YouTube video of using steam to remove these knots. I'll try it one of these days just to see if it will work on a knot that's been epoxied in place. Maybe others among us have also seen this video.
Gary
SOTD 99%: Monday, Wednesday, and Friday, soaps & creams, synthetic / badger brushes, Colonial General razor, Kai & Schick blades, straight razors any time, Superior 70 aftershave splash + menthol + 444
SOTD 99%: Monday, Wednesday, and Friday, soaps & creams, synthetic / badger brushes, Colonial General razor, Kai & Schick blades, straight razors any time, Superior 70 aftershave splash + menthol + 444
Re: Shorter loft
Someone needs to invent one of these:
Chris
Chris
"Je n'ai pas besoin de cette hypothèse."
Pierre-Simon de Laplace
Pierre-Simon de Laplace