Is it uncommon to want to switch blades after 3 uses?

Let's talk about single and double edged razors and the blades that they use.
pj_rage
Posts: 70
Joined: Tue Dec 16, 2008 7:18 pm

Is it uncommon to want to switch blades after 3 uses?

Post by pj_rage »

I've been wet shaving with my merkur HD (34c) for about 2 weeks now and so far I'm loving it.

I only have two different blades to try so far. I started with an Israeli Personna blade, and after about 5 shaves I felt like it was skipping a bit so I figured I would switch it up and try out one of the derby blades I had. The derby felt much sharper to me, but it could be just because the IP was dulled.

Now I believe I used that derby 3, maybe 4 times and everything seemed OK until I went to do my ATG pass and the blade was skipping and having a very hard time cutting. So I stopped, popped in a new derby blade, and I could tell an immediate HUGE difference in sharpness, and my ATG pass went much smoother. I actually almost cut myself a couple times because of how much sharper it was. And this was vs a blade with 3-4 shaves on it.

It's not a big deal to me if I have to change the blade every 3-4 shaves, but I was just under the impression that blades lasted most of you closer to 6 or 7 shaves? Am I just picky about sharpness, or am I doing something wrong or? I mean, my shaves are great lately, BBS except under my chin and very comfortable. I know my technique probably isn't perfect, but it's getting to be pretty good where I feel like I actually know what I'm doing at least. I just can't go ATG under the chin to get BBS there without the razor dragging to a halt and feeling like I'm going to slice myself open. I'm sure it'll come with practice, or maybe I need a sharper blade, or maybe it'll never happen - either way, it's not a big deal because I'm very satisfied with my shaves as is.

I'm thinking I could eek out another 2-3 shaves beyond the 3-4 if I didn't do ATG, but it would seem that ATG requires a sharper blade than other passes in order for it to be comfortable - at least for me. Is this usually the case?
User avatar
ateace
Posts: 695
Joined: Tue Jan 29, 2008 9:14 am

Post by ateace »

Someone did a survey recently and it seems that most DE shavers will change blades after three or four shaves. Once you get to know a particular brand of blade, you'll probably want to change it after what you expect will be the last good, comfortable shave.
User avatar
jvan
Mr. Vintage Himself
Posts: 1661
Joined: Fri Mar 11, 2005 6:31 am
Location: Wisconsin

Post by jvan »

You're using the same two blades that I use and getting the same amount of shaves out of them. Those blades are inexpensive enough that I have never given a second thought to pitching them after three shaves. At that price why risk a 4th mediocre shave?
John V
"What one relishes, nourishes"

Benjamin Franklin
pj_rage
Posts: 70
Joined: Tue Dec 16, 2008 7:18 pm

Post by pj_rage »

Thanks guys. You're right, at the price for these blades, I'm definitely not worried about getting 3 shaves each. For some reason I just thought I might be getting more per.
User avatar
Slartibartfast
Posts: 75
Joined: Tue Dec 16, 2008 2:03 pm
Location: Dayton, OH

Post by Slartibartfast »

When people refer to the number of shaves they get from a de blade..

is a shave

a) each pass

b) The entire 2-3 pass process
-- Ben
User avatar
jvan
Mr. Vintage Himself
Posts: 1661
Joined: Fri Mar 11, 2005 6:31 am
Location: Wisconsin

Post by jvan »

In my case, start to finish. Three passes plus a T&C. (Touch & Cut)
John V
"What one relishes, nourishes"

Benjamin Franklin
marsos52
Posts: 2973
Joined: Fri Nov 30, 2007 6:45 pm
Location: new jersey

Post by marsos52 »

in gerenal most shavers get 3 complete shaves before the blade doesnt perform

one expection is the gillette swedes they last tow times longer

of course other things may change how long a blade last is how many passes and how heavy ones beard is

my merkurs blades give me 3 greats shaves i do get 4 to 5 shaves with them in the edwin jagger razors why i have no idea

i find feathers only last me 2 shaves

marc
pj_rage
Posts: 70
Joined: Tue Dec 16, 2008 7:18 pm

Post by pj_rage »

For clarity, I was personally referring to the complete shave when I was saying how long they lasted. Just like jvan, for me, that is WTG, XTG, ATG, and touch up.

Have any of you guys had any experience with the cryo blades? I've been interested in trying some from greatrazors.com for a while (the cartridge ones) but now that I've started DE shaving I think I might hold off and eventually try out some. They carry the merkur blades and (american?) personnas, but I emailed the guy, and he said he could cryo a few packs (not sure the limit for the price) I sent for around $10. Not sure if it's something I would continue to do, but might be interesting for a trial.
Timpac
Posts: 617
Joined: Thu Mar 30, 2006 1:41 am
Location: Beaverton, OR

Post by Timpac »

I was thinking of trying them for the cartridges I use with my headblade but never got around to it. If he's willing to do that process to a DE, I'd be curious to hear how it works out, though, that's for sure.
User avatar
Racso_MS
Merkur Man
Posts: 3179
Joined: Fri Oct 27, 2006 6:35 am
Location: Mississippi

Post by Racso_MS »

This topic has been discussed in the past, but it's worth bringing up occassionally for new comers.

The number of shaves one gets with a blade is going to be a YMMV (Your Mileage May Vary) situation. You have to factor in your beard type, the razor you are using, preparation of the beard, and technique etc.

Some blades work better in particular razors for the particular individual. I find that Merkur razor blades give me an excellent shave in a Merkur razor, but not so much in a Gillette. Some can't stand the Merkur razor blade and find them dull or aggressive. Some love the Feather while others think they are too sharp, and so on. You have to experiment to find the blade(s) that work for you.

So to answer your question, 3-5 is a common thread throughout the forum, but I've seen an occassional 20 and even an occassional 1 shave before changing blades. There is no correct answer. Considering how cheap the blades are, if it feels bad, change it.

After all the object of the game is to...

Enjoy your shave... :D
Best Regards From the Deep South...
Remember; It's Not A Race, It's Your Face...
And As Always, Enjoy Your Shave...
(Racso) Oscar...
User avatar
Brett G
Viscount Krona
Posts: 1172
Joined: Wed Apr 13, 2005 1:31 pm
Location: Georgia, USA

Post by Brett G »

For the first couple years of my wetshaving experience I tossed a blade after three shaves whether I needed to or not. As my technique improved, and I realized that some products perform better in certain parts of a blade's life cycle, I began to push deeper. I can get 5-7 shaves out of most blades. A Swedish Gillette can be pushed to 14 days (possibly beyond) if you know what you are doing.

Ultimately there is no right or wrong answer and it is not a contest to see who can squeeze the most out of a blade. Whatever feels right to you at a particular time is correct.
Brett
bernards66
Duke of Silvertip!
Posts: 27393
Joined: Sun Feb 27, 2005 1:02 pm

Post by bernards66 »

Yes, prep/products and technique are a significent part of any shaver's equation in this regard. But also, blades definately do vary. Several years back, on the old forum, many members were shocked when I said I only used a blade for three shaves and goodbye....thought I was extravagant, or overly anal. But these were when I was stuck with the German made Wilkinsons. and Merkurs. When I got ahold of the first Swedish Gillettes I realized that I once again had a blade that could easily go a week, just like the old LB Wilkinsons had always done for me years ago.
Regards,
Gordon
User avatar
ChemErik
Posts: 745
Joined: Tue Sep 23, 2008 8:25 am
Location: Denver, CO

Post by ChemErik »

Most blades give me three complete shaves, so I'll agree that's about right. A few blades go to four shaves for me (Astra Superior, 7 O'Clock SE, Dorco 300 & 301, Bic Plat.). A few only go two shaves (Derby, Durasharp Carbon). I don't get a change from razor to razor or from the minor changes in prep I make. Everyone seems a little different with blades, so once you get consistently good shaves, try a blade sampler and decide what works best for you.
84.3% of statistics are made up on the spot.
User avatar
Nitrox
AC/DC
Posts: 3853
Joined: Tue Mar 21, 2006 3:28 pm

Post by Nitrox »

I get a good three shaves out of a regular blade. Any more than that and I can start feeling the dullness. Tescos and the Swedes can give a few more shaves (maybe 5 or 6) in my experience.
Bruno

"Shhhhhaving cream, be nice and clean
shave every day and you'll always look keen."
User avatar
razorburned
Posts: 758
Joined: Mon May 21, 2007 7:20 am
Location: Pittsburgh, PA

Post by razorburned »

First off......don't worry about how often you change the blade while getting your technique down. Change the blade when you feel it needs changed. After you have the tech down.....

It really depends on what your end goal is.....

If you are wanting to get the most shaves for your money, and are willing to deal with a few less than optimal shaves for the sake of $.....try a bunch of different blades and find the one that lasts the longest, or is cheapest per shave.

If you are wanting shave bliss, damn the cost, change the blade when ever the mood strikes you....every shave, every other shave, what ever.

As you are now using DE blades, even if you choose to use the high dollar blades (for instance, the 'Swede' at about a buck each) and pitch them after every shave, you will still likely spend less than you would per week than if you used those current $3+ cartridges

During the summer months I shave my head (both head and face with a DE), I change my face blade every 2-3 shaves, but the blade I use on my head, I use a fresh blade every day as the hair is much denser on (most) of my head.
Never be afraid to try something new. Remember that a lone amateur built the Ark. A large group of professionals built the Titanic
Gone Troppo
Posts: 74
Joined: Tue Apr 29, 2008 10:00 am
Location: CT

Post by Gone Troppo »

I average 3 days per blade (I occasionally shave twice a day) whether it's Derbys. Polsilvers, Iridiums, or Crystals. However, I can occasionally get a solid week out of a Feather. Go figure.
Boyextraordinare

Post by Boyextraordinare »

I think ppl have a tendency to toss blades prematurely, but you can very much afford to when you're using DE blades...

That said, I push mine to the limit and I've yet to find a plat.-chrome that can't be pressed at least a week.
User avatar
BullGoose
Vendor
Posts: 3078
Joined: Fri Jan 02, 2009 7:23 am
Location: Redondo Beach, CA
Contact:

Post by BullGoose »

I change blades after three shaves. I figure that since the blades are so cheap (compared to a cartridge), why press your luck.
http://www.bullgooseshaving.com -Rocnel, Barbaros, Boellis Panama, Savonniere du Moulin, Asylum Shave Works and so much more.

- Phil
User avatar
ThePossum
Posts: 1802
Joined: Sat Jan 19, 2008 8:20 am
Location: Halfway between Possum Neck and Possum Holler, Pa

Post by ThePossum »

I've found with the Polsilver and the Gillette 7 O'Clock SharpEdge (the yellow wrapper and box) I can go about two weeks, that's 14 shaves. All of the BBS variety.

I found that using these blades in different razors make not difference. Still get great BBS shaves.

For me a complete shave is three passes and touch up as well as a two pass head shave.

As for the SE blades I find the Ted Pella PTFE blade will give me a week's worth of shaving both face and head as explained above.

But as Oscar said, YMMV.
Bryce

My Shave Stuff
The Original Safety Too - An SE Razor Forum
User avatar
Squire
Squadron Leader
Posts: 18932
Joined: Mon Apr 18, 2005 3:41 pm
Location: North East, MS

Post by Squire »

Hey pj, 3-4 shaves is about average for me.
Regards,
Squire
Post Reply