*SOLD* Thäter 4125-4 Silvertip Brush
*SOLD* Thäter 4125-4 Silvertip Brush
This Thäter 4125-4 brush was received new as part of a trade. It has been used about ten times. It has shed 3 hairs to my memory. It has considerable backbone and a lovely soft feel. It's the best badger brush I've ever used, but I am getting a two-band and I don't need two such high level brushes.
The Thäter measurements are 30mm knot and total height of 116mm. Who am I to argue?
These brushes retails from the Different Scent for 198 Euros. The trade value was roughly 125 Euros. I am asking US$115, including insured express shipping worldwide.
Please PM with questions.
Thanks for your attention.
The Thäter measurements are 30mm knot and total height of 116mm. Who am I to argue?
These brushes retails from the Different Scent for 198 Euros. The trade value was roughly 125 Euros. I am asking US$115, including insured express shipping worldwide.
Please PM with questions.
Thanks for your attention.
Last edited by JimR on Sat Nov 12, 2011 11:23 pm, edited 1 time in total.
Around 56mmalsutl wrote:Do you have an idea what is loft dimensions?
I did not see it at other sites.
http://www.bullgooseshaving.com -Rocnel, Barbaros, Boellis Panama, Savonniere du Moulin, Asylum Shave Works and so much more.
- Phil
- Phil
Crag, By "Bernd", do you mean Shavemac? They are two different manufacturers with two different products. I have used one Shavemac brush, and it was very soft and floppy. This is the antithesis to that--firm and strong, with an excellent amount of "massage" to it.Crag wrote:Jim,
That's a beautiful brush! Is it akin to the line that Bernd offers? They look strikingly similar...and everyone know what wonderful brushes Bernd sells!
Good luck on your sale!
It is indeed a fantastic deal!franz wrote:+1 on Jim's observations about the Thäter silvertips. Considering the 4125/4 sells for $175 new, this is a fantastic deal.
http://www.bullgooseshaving.com -Rocnel, Barbaros, Boellis Panama, Savonniere du Moulin, Asylum Shave Works and so much more.
- Phil
- Phil
If I didn't have a Thater on the way right now, this would've been mine.
Gil, I can tell your hand is shaking. The temptation is strong....
Regards,
Gil, I can tell your hand is shaking. The temptation is strong....
Regards,
Regards,
Tim
Why should we not meet, not always as dyspeptics, to tell our bad dreams, but sometimes as eupeptics, to congratulate each other on the ever-glorious morning? - Henry David Thoreau
Tim
Why should we not meet, not always as dyspeptics, to tell our bad dreams, but sometimes as eupeptics, to congratulate each other on the ever-glorious morning? - Henry David Thoreau
thater thirty
PM sent....great brush !
One would think so! On the other hand, Thäter's specifications routinely overestimate the total height of the brush by ~6 mm or so. Having owned a couple myself (including a size 4), I find that BullGoose's measurements are the ones that are true to life. Can't trust the manufacturer.alsutl wrote:I know that brush is sold, but if loft is 56mm then handle height is 60mm, since it listed as overall 116mm. I hope my math is correct.franz wrote:Likely to be 54mm.gil3591 wrote:can you tell me the handle length? thanks
Alex
Sorry for the side conversation Jim.
Alex, using my calipers, I measured the handle at 52mm and the loft at 63mm, so the overall height of this brush by my measurement is 115mm give or take.alsutl wrote:I know that brush is sold, but if loft is 56mm then handle height is 60mm, since it listed as overall 116mm. I hope my math is correct.franz wrote:Likely to be 54mm.gil3591 wrote:can you tell me the handle length? thanks
Alex
knot
...................what was your measurement of the knot ?JimR wrote:Alex, using my calipers, I measured the handle at 52mm and the loft at 63mm, so the overall height of this brush by my measurement is 115mm give or take.alsutl wrote:I know that brush is sold, but if loft is 56mm then handle height is 60mm, since it listed as overall 116mm. I hope my math is correct.franz wrote: Likely to be 54mm.
Alex
Re: knot
31mm. Like I said, who am I to argue?malocchio wrote:...................what was your measurement of the knot ?JimR wrote:Alex, using my calipers, I measured the handle at 52mm and the loft at 63mm, so the overall height of this brush by my measurement is 115mm give or take.alsutl wrote: I know that brush is sold, but if loft is 56mm then handle height is 60mm, since it listed as overall 116mm. I hope my math is correct.
Alex