*SOLD* Thäter 4125-4 Silvertip Brush

Got something to sell or trade? Feel free to post in this group!
Post Reply
User avatar
JimR
Posts: 851
Joined: Mon Sep 08, 2008 10:40 pm
Location: Japan

*SOLD* Thäter 4125-4 Silvertip Brush

Post by JimR »

This Thäter 4125-4 brush was received new as part of a trade. It has been used about ten times. It has shed 3 hairs to my memory. It has considerable backbone and a lovely soft feel. It's the best badger brush I've ever used, but I am getting a two-band and I don't need two such high level brushes.

The Thäter measurements are 30mm knot and total height of 116mm. Who am I to argue?

These brushes retails from the Different Scent for 198 Euros. The trade value was roughly 125 Euros. I am asking US$115, including insured express shipping worldwide.

Please PM with questions.

Thanks for your attention.


Image


Image
Last edited by JimR on Sat Nov 12, 2011 11:23 pm, edited 1 time in total.
alsutl
Posts: 4
Joined: Sat Apr 02, 2011 10:14 am
Location: Massachusetts

Post by alsutl »

Do you have an idea what is loft dimensions?
I did not see it at other sites.
User avatar
BullGoose
Vendor
Posts: 3018
Joined: Fri Jan 02, 2009 7:23 am
Location: Redondo Beach, CA
Contact:

Post by BullGoose »

alsutl wrote:Do you have an idea what is loft dimensions?
I did not see it at other sites.
Around 56mm
http://www.bullgooseshaving.com -Czech & Speake, H.L. Thater, Mergress, Rocnel, Boellis Panama,Castle Forbes, Asylum Shave Works and more.

- Phil
Crag
Posts: 436
Joined: Wed Jan 03, 2007 8:31 pm
Location: Perris, Ca USA

Post by Crag »

Jim,

That's a beautiful brush! Is it akin to the line that Bernd offers? They look strikingly similar...and everyone know what wonderful brushes Bernd sells!

Good luck on your sale!
Matt

"The 'Path of least resistance' is what makes rivers and Men crooked."
--Ezra Taft Benson
greyhawk
Posts: 203
Joined: Sun Jan 09, 2011 10:33 pm

Post by greyhawk »

Beautiful brush and a good price. I have a smaller version of that brush and it's wonderful. Good luck with the sale!
User avatar
JimR
Posts: 851
Joined: Mon Sep 08, 2008 10:40 pm
Location: Japan

Post by JimR »

Crag wrote:Jim,

That's a beautiful brush! Is it akin to the line that Bernd offers? They look strikingly similar...and everyone know what wonderful brushes Bernd sells!

Good luck on your sale!
Crag, By "Bernd", do you mean Shavemac? They are two different manufacturers with two different products. I have used one Shavemac brush, and it was very soft and floppy. This is the antithesis to that--firm and strong, with an excellent amount of "massage" to it.
User avatar
franz
Posts: 201
Joined: Fri Jun 17, 2011 2:00 pm

Post by franz »

+1 on Jim's observations about the Thäter silvertips. Considering the 4125/4 sells for $175 new, this is a fantastic deal.
User avatar
BullGoose
Vendor
Posts: 3018
Joined: Fri Jan 02, 2009 7:23 am
Location: Redondo Beach, CA
Contact:

Post by BullGoose »

franz wrote:+1 on Jim's observations about the Thäter silvertips. Considering the 4125/4 sells for $175 new, this is a fantastic deal.
It is indeed a fantastic deal!
http://www.bullgooseshaving.com -Czech & Speake, H.L. Thater, Mergress, Rocnel, Boellis Panama,Castle Forbes, Asylum Shave Works and more.

- Phil
User avatar
gil3591
Posts: 3039
Joined: Sun Feb 08, 2009 9:36 am
Location: ohio

Post by gil3591 »

can you tell me the handle length? thanks
Gil
futur/EJ357/ gillette redtip
iridium ,blue IP
thater, shavemac.anchorset/tgn,sr3226
dirty bird
and a prayer
User avatar
TRBeck
Soapgeek
Posts: 5102
Joined: Sat Feb 23, 2008 1:59 pm
Location: Denver, CO

Post by TRBeck »

If I didn't have a Thater on the way right now, this would've been mine.

Gil, I can tell your hand is shaking. The temptation is strong....

Regards,
Regards,
Tim

Why should we not meet, not always as dyspeptics, to tell our bad dreams, but sometimes as eupeptics, to congratulate each other on the ever-glorious morning? - Henry David Thoreau
User avatar
franz
Posts: 201
Joined: Fri Jun 17, 2011 2:00 pm

Post by franz »

gil3591 wrote:can you tell me the handle length? thanks
Likely to be 54mm.
User avatar
malocchio
Posts: 1700
Joined: Sun Apr 11, 2010 11:11 am
Location: richmond calif

thater thirty

Post by malocchio »

PM sent....great brush !
User avatar
JimR
Posts: 851
Joined: Mon Sep 08, 2008 10:40 pm
Location: Japan

Post by JimR »

On hold pending payment.
alsutl
Posts: 4
Joined: Sat Apr 02, 2011 10:14 am
Location: Massachusetts

Post by alsutl »

franz wrote:
gil3591 wrote:can you tell me the handle length? thanks
Likely to be 54mm.
I know that brush is sold, but if loft is 56mm then handle height is 60mm, since it listed as overall 116mm. I hope my math is correct.
Alex
User avatar
franz
Posts: 201
Joined: Fri Jun 17, 2011 2:00 pm

Post by franz »

alsutl wrote:
franz wrote:
gil3591 wrote:can you tell me the handle length? thanks
Likely to be 54mm.
I know that brush is sold, but if loft is 56mm then handle height is 60mm, since it listed as overall 116mm. I hope my math is correct.
Alex
One would think so! On the other hand, Thäter's specifications routinely overestimate the total height of the brush by ~6 mm or so. Having owned a couple myself (including a size 4), I find that BullGoose's measurements are the ones that are true to life. Can't trust the manufacturer. :lol:

Sorry for the side conversation Jim.
User avatar
JimR
Posts: 851
Joined: Mon Sep 08, 2008 10:40 pm
Location: Japan

Post by JimR »

alsutl wrote:
franz wrote:
gil3591 wrote:can you tell me the handle length? thanks
Likely to be 54mm.
I know that brush is sold, but if loft is 56mm then handle height is 60mm, since it listed as overall 116mm. I hope my math is correct.
Alex
Alex, using my calipers, I measured the handle at 52mm and the loft at 63mm, so the overall height of this brush by my measurement is 115mm give or take.
User avatar
malocchio
Posts: 1700
Joined: Sun Apr 11, 2010 11:11 am
Location: richmond calif

knot

Post by malocchio »

JimR wrote:
alsutl wrote:
franz wrote: Likely to be 54mm.
I know that brush is sold, but if loft is 56mm then handle height is 60mm, since it listed as overall 116mm. I hope my math is correct.
Alex
Alex, using my calipers, I measured the handle at 52mm and the loft at 63mm, so the overall height of this brush by my measurement is 115mm give or take.
...................what was your measurement of the knot ?
LouisIII
Posts: 339
Joined: Tue Apr 21, 2009 5:04 pm
Location: European Union

Post by LouisIII »

Congrats to buyer, you have a brush to which I would haply swear fidelity.
User avatar
JimR
Posts: 851
Joined: Mon Sep 08, 2008 10:40 pm
Location: Japan

Re: knot

Post by JimR »

malocchio wrote:
JimR wrote:
alsutl wrote: I know that brush is sold, but if loft is 56mm then handle height is 60mm, since it listed as overall 116mm. I hope my math is correct.
Alex
Alex, using my calipers, I measured the handle at 52mm and the loft at 63mm, so the overall height of this brush by my measurement is 115mm give or take.
...................what was your measurement of the knot ?
31mm. Like I said, who am I to argue?
Post Reply