Razor care between shaves
-
- Posts: 3121
- Joined: Thu Sep 29, 2011 1:13 am
- Location: Central Maine
In todays litigious society it wouldn't surprise me one whit if it was to prevent lawsuits. Or even perform multiple functions with the one statement.
Maybe someone needs to make a safety razor blade, that is one that won't cut and is completely unuseable. Whoops! Sorry, it slipped my mind, one manufacturer already does... Dorco. Not a crappy blade, just ahead of their time!
Maybe someone needs to make a safety razor blade, that is one that won't cut and is completely unuseable. Whoops! Sorry, it slipped my mind, one manufacturer already does... Dorco. Not a crappy blade, just ahead of their time!
FWIW, I found this on Amazon under product description for Shark blades:
"SHARK SUPER CHROME DOUBLE EDGE RAZOR BLADES deliver a smooth, luxurious and comfortable shave. These premium blades are used barbers and wet shavers alike. Manufactured in an ISO2000 Facility, these blades are world reknown for their high quality. Care should be taken to not wipe this blade dry after use. Instead, simply shake the razor dry to avoid removal of the blade's coating. We are sure you will be thrilled with these blades.. "
Bolded text done by me.
"SHARK SUPER CHROME DOUBLE EDGE RAZOR BLADES deliver a smooth, luxurious and comfortable shave. These premium blades are used barbers and wet shavers alike. Manufactured in an ISO2000 Facility, these blades are world reknown for their high quality. Care should be taken to not wipe this blade dry after use. Instead, simply shake the razor dry to avoid removal of the blade's coating. We are sure you will be thrilled with these blades.. "
Bolded text done by me.
-Neal (DE user since 1998)
I shave therefore I am
I shave therefore I am
Certainly Neal but amazon does not constitute an authority. The warning against wiping coated blades also appears on uncoated, stainless, carbon, and blades made of steel of any description.
The point is they don't want you to handle it without saying outright the things can be dangerous.
The point is they don't want you to handle it without saying outright the things can be dangerous.
Regards,
Squire
Squire
- Trumperman
- Bill Extraordinaire
- Posts: 2893
- Joined: Thu Dec 14, 2006 7:17 pm
- Location: Charlotte, NC
When handling any razor or blade I keep my hands completely dry. Mischances do happen over a period of time, I once dropped a razor when a fully grown Boxer came bounding into the bathroom while I was shaving and smacked into my knee. Delightful child but clumsy.
I do draw the line at gloves though.
I do draw the line at gloves though.
Regards,
Squire
Squire
Re:
CMur12 wrote:Daniel, I don't think you need to do anything else.
I'm a little more extreme in my practices, however. I prefer a three-piece razor because of the ease of cleaning. I take the razor apart after the shave, rinse the pieces well, and dry them with a towel. I rinse the blade off well, air-dry it, hand-strop it, and put everything back together, sparkling clean, for the next shave.
- Murray
i do this too, mostly, - I leave a 3 piece in 3 pieces until the next shave. all part of the ritual for me.
- ThePossum
- Posts: 1802
- Joined: Sat Jan 19, 2008 8:20 am
- Location: Halfway between Possum Neck and Possum Holler, Pa
Re: Razor care between shaves
Seems that I am not like most of you. Since I rotate among my many razors for each shave I will always remove the blade from the razor. I then rinse and hand strop the blade along the edge of my hand. Yes, Squire I am aware that one of my 6 attack cats could bump into my knee and cause an injury but I am very very careful.
I do this for my DE and SE razors but can't do it with my injectors. I find that by hand stropping and rinsing that I can get a lot more shaves from my blades. Like 14 from my Gillette SharpEdge SE blades and 7 or so from my PTFE coated GEM SE blades.
It works for me and does not really take that much more time for my shave. But as is often said here at SMF, YMMV!
I do this for my DE and SE razors but can't do it with my injectors. I find that by hand stropping and rinsing that I can get a lot more shaves from my blades. Like 14 from my Gillette SharpEdge SE blades and 7 or so from my PTFE coated GEM SE blades.
It works for me and does not really take that much more time for my shave. But as is often said here at SMF, YMMV!
Re: Razor care between shaves
One thing about the Cobra Classic SE is that I can rinse the blade separately from the razor after the shave, then replace it when it's time for the next shave. This is different from I suppose any other injector-type of razor, where the blade is tightly gripped within the head of the razor until the injector forces the blade out when the new one goes in. The design of the old style injectors is somewhat limited in this respect. Also, the small standard injector heads are generally just too little to be taken out, handled, and then put back in. Wouldn't be practical.
Gary
SOTD 99%: Monday, Wednesday, and Friday, soaps & creams, synthetic / badger brushes, Colonial General razor, Kai & Schick blades, straight razors any time, Superior 70 aftershave splash + menthol + 444
SOTD 99%: Monday, Wednesday, and Friday, soaps & creams, synthetic / badger brushes, Colonial General razor, Kai & Schick blades, straight razors any time, Superior 70 aftershave splash + menthol + 444