New synthetic brush upgrade project

What kind of shaving brush do you use? Tell us all about it!
Post Reply
brothers
Posts: 19338
Joined: Sun Sep 14, 2008 7:18 am
Location: Oklahoma City USA

New synthetic brush upgrade project

Post by brothers » Thu Oct 04, 2018 2:31 pm

Funny thing happened. Synthetic shaving brush technology has been advancing at the speed of light. Here's the nutshell: I've removed the synthetic Evolution brush head that came from Shave Revolution just a few months before he quit business in mid 2016. I've enlarged the hole this afternoon to accommodate a 28mm brush. I've ordered a new one from APShave in Canada. It's called SynBad. The mesquite burl brush handle is a beauty made by Bob Quinn at Elite. As soon as the SynBun arrives I'll install it if it fits. Looking forward to the new brush. The old head was 24mm in a 26mm hole. I had to add a trim strip to make it fit better. The new head is advertised at 28mm. I'm not making any judgments now about the new brush. Watch this space for the inevitable review in the next couple of weeks or so. This is what it looks like right now.

Here are some of the attributes of the SynBad synthetic knot:
SynBad knot. . . . two goals with this knot 1) getting the closest imitation to badger in appearance yet and 2) providing consumers with a knot that had a great splay. This knot solves the problem many have with the Tuxedo not being able to splay easy, and it's . . . beautiful . . . . The tips are on par with the Cashmere, the splay is one of the best out of all [AP Shave] knots, and the backbone is a bit less than that of the Tuxedo (enough for easier splay) . . . .
Mesquite burl handle 03Oct2018.jpg
Mesquite burl handle 03Oct2018.jpg (642.51 KiB) Viewed 1156 times
This is what the brush looked like yesterday before I removed the Shave Revolution synthetic knot.
Mesquite burl refinish 1.jpg
Mesquite burl refinish 1.jpg (179.22 KiB) Viewed 1154 times
Gary

Bill_K
Posts: 108
Joined: Mon Feb 05, 2018 12:40 pm
Location: Red Deer, Alberta, Canada

Re: New synthetic brush upgrade project

Post by Bill_K » Tue Oct 09, 2018 11:54 am

Nice work, Gary!

I think you'll like the SynBad knot; I bought one from APShaveCo in the "Blue Lagoon" handle about a month ago and I'm really quite surprised that I like it so much. It's extremely soft; so much so that it feels like running a light bulb across my face.

Bill
Bill

brothers
Posts: 19338
Joined: Sun Sep 14, 2008 7:18 am
Location: Oklahoma City USA

Re: New synthetic brush upgrade project

Post by brothers » Tue Oct 09, 2018 1:58 pm

Looking forward to the experience.
Gary

User avatar
libertine
Posts: 13
Joined: Tue Jun 09, 2015 4:31 pm

Re: New synthetic brush upgrade project

Post by libertine » Fri Oct 12, 2018 10:17 am

Always interested in new synthetic knots. I agree with the progress.

brothers
Posts: 19338
Joined: Sun Sep 14, 2008 7:18 am
Location: Oklahoma City USA

Re: New synthetic brush upgrade project

Post by brothers » Fri Oct 12, 2018 12:33 pm

The knot was delivered yesterday. Now it's been installed in the handle, and the glue is drying. I'm looking forward to tomorrow's shave!
Gary

brothers
Posts: 19338
Joined: Sun Sep 14, 2008 7:18 am
Location: Oklahoma City USA

Re: New synthetic brush upgrade project

Post by brothers » Sat Oct 13, 2018 7:52 am

Here's the finished project, taken just a few minutes after its first shave lather this morning.
SynBad mesquite burl brush 13OCT2018.jpg
SynBad mesquite burl brush 13OCT2018.jpg (1.57 MiB) Viewed 1012 times
Gary

brothers
Posts: 19338
Joined: Sun Sep 14, 2008 7:18 am
Location: Oklahoma City USA

Synthetic Siblings

Post by brothers » Mon Oct 15, 2018 12:11 pm

Here is a photo of the SynBad synthetic next to the SilkSmoke synthetic. I used the SynBad this morning with the AOS Peppermint shaving cream. This brush is somewhat softer on the face than the SilkSmoke. It appears to my eye that maybe the fibers are microscopically thinner in diameter and seem to be packed in larger quantity than the SilkSmoke fibers. Note: Neither brush is superior or inferior to the other. Quite the contrary. Just a bit different. Both knots came from Andrew at APShave Co. in Canada. They are beautiful, large in size, and both of them perform flawlessly with soap or cream. I admire the cut and trim of the SilkSmoke because it seems to be a bit unusual in proportion as compared to most bulb shaped knots I have used, including the SynBad.
Synthetic Siblings 15 OCT 2018.jpg
Synthetic Siblings 15 OCT 2018.jpg (1.13 MiB) Viewed 949 times
Last edited by brothers on Mon Oct 15, 2018 6:34 pm, edited 1 time in total.
Gary

CMur12
Posts: 6813
Joined: Mon Dec 18, 2006 8:41 pm
Location: Moses Lake, Washington

Re: New synthetic brush upgrade project

Post by CMur12 » Mon Oct 15, 2018 5:21 pm

Very nice-looking brushes, Gary. Thanks for the report.

- Murray
Give me Soap or give me death!

Bill_K
Posts: 108
Joined: Mon Feb 05, 2018 12:40 pm
Location: Red Deer, Alberta, Canada

Re: New synthetic brush upgrade project

Post by Bill_K » Tue Oct 16, 2018 11:15 am

X2 on Murray's comment.

Just curious: have you tried making a handle from antler? I have a Red Deer antler - one half from an animal that my late grandfather and his buddy harvested in the Old Country so many years ago - and I'm thinking it deserves better treatment than being used as a coat/hat rack in my garage.
Bill

User avatar
drmoss_ca
Admin
Posts: 9242
Joined: Thu Jul 08, 2004 4:39 pm

Re: New synthetic brush upgrade project

Post by drmoss_ca » Tue Oct 16, 2018 4:55 pm

That's a nice looker, Gary.
"Je n'ai pas besoin de cette hypothèse."
Pierre-Simon de Laplace

brothers
Posts: 19338
Joined: Sun Sep 14, 2008 7:18 am
Location: Oklahoma City USA

Re: New synthetic brush upgrade project

Post by brothers » Wed Oct 17, 2018 3:30 pm

Bill, I lack the knowledge and tools that it takes to create a turned handle. Fortunately there are some guys out there that can do it, if anyone can.

Dr. Moss, thanks!
Gary

Post Reply