Page 1 of 1
iKon Custom Made Safety Razors
Posted: Sun Jul 12, 2009 5:34 pm
by Pureslab
Posted: Sun Jul 12, 2009 6:12 pm
by Squire
Welcome aboard. Very nice looking razors, can you make one gold plated.
Posted: Sun Jul 12, 2009 6:36 pm
by GA Russell
Welcome Pureslab!
What was it about existing razors that you felt was not right for you, such that you made something unique?
I am in the market for a mild razor. How mild is your iKon? About the same as a Merkur or more mild than that?
Posted: Sun Jul 12, 2009 6:40 pm
by CMur12
You've got my attention, as I really like three-piece razors. Your prices are also very attractive.
My questions are the following:
1. Do these have the blade laid directly upon the comb or is it raised slightly above it?
2. Are these mild, moderate, or aggressive shavers? Can you compare them to any commonly known razors in this respect?
3. Do you offer any shorter handles (about the same length as a thick-handled Tech or a Super Speed)?
Thanks!
- Murray
Posted: Sun Jul 12, 2009 7:34 pm
by MadAussie
looks great, whats the weight?
Posted: Mon Jul 13, 2009 2:59 am
by Pureslab
Squire wrote:Welcome aboard. Very nice looking razors, can you make one gold plated.
Sure can - will use a 5 micron plating , dipped 5 times in 18kt gold. Can do the same in real silver as well.
I personally like the natural finish of stainless steel but because these are custom pieces there are plenty of options available
Posted: Mon Jul 13, 2009 3:05 am
by Pureslab
GA Russell wrote:Welcome Pureslab!
What was it about existing razors that you felt was not right for you, such that you made something unique?
I like a heavy razor , but did not like the future or vision
Also like stainless steel opposed to brass that has been plated - that is just a cheap way to mass produce something.
I also wanted a grip that literally stuck to your hand and my unique sharp diamond knurling process does - hard to describe this how this grips but it is unbelievable
I am in the market for a mild razor. How mild is your iKon? About the same as a Merkur or more mild than that?
this is semi aggressive shaver
Posted: Mon Jul 13, 2009 3:11 am
by Pureslab
CMur12 wrote:You've got my attention, as I really like three-piece razors. Your prices are also very attractive.
My questions are the following:
1. Do these have the blade laid directly upon the comb or is it raised slightly above it?
it lays very flat on the comb
2. Are these mild, moderate, or aggressive shavers? Can you compare them to any commonly known razors in this respect?
slightly aggressive but smooth as there are no large gap issues with the blade exposure
3. Do you offer any shorter handles (about the same length as a thick-handled Tech or a Super Speed)?
sure do , just did not post any pics yet - will do a ALL STAINLESS STEEL bulldog style handle and many other styles
Thanks!
- Murray
Posted: Mon Jul 13, 2009 3:14 am
by Pureslab
MadAussie wrote:looks great, whats the weight?
with the handles pictured - I have the slim classic handle which is the thinner handle - approx 80 grams with the iKon open comb head
The large handle is called my "extended tech" and that is 100 grams with the head attached
Posted: Tue Jul 14, 2009 5:30 am
by mycat
Hi guys,
I already received Greg(Pureslab) iKon razor with the long handle tech(pix 3). I can attest to the quality of this razor. This is the best razor and gives the best shave that I have ever had. I have been posting my results in this forum as SOTD. The weight of this razor is approx 3.3 oz and length is 4". The grip is unbelievable as the knurling is very deep. You can buy from iKon razors with confidence. Also who else is building razors from scratch? Finally a razor made from 100% stainless steel.
Posted: Mon Jul 20, 2009 11:05 am
by mycat
Some additional pictures of this wonderful razor. This has the Old Type head with a heavy tech long handle(4")
Posted: Mon Jul 20, 2009 4:33 pm
by Whistler
Is there a price option for gold? And plated?
Also, if it were plated I assume the impression of the tack of the thread would be hidden on the head?
Nice razor, BTW....
Posted: Mon Jul 20, 2009 7:05 pm
by mycat
I believe Greg from iKon razors says he can do gold,silver,etc with 5 micron plating to any razor. I am sure the price will be higher. He also said to look out for his new website(not online yet) ikonrazors.com
Posted: Fri Jul 24, 2009 7:27 pm
by Pureslab
any questions regarding this custom made razors please contact me at
ikonrazors@gmail.com
many thanks to all who have already expressed interest
Posted: Sat Aug 22, 2009 6:25 am
by mycat
It appears Pureslab has 4 different razors for sale. I found this on TSD
Re:
Posted: Thu Jan 03, 2019 8:56 pm
by brothers
mycat wrote: ↑Tue Jul 14, 2009 5:30 am
Hi guys,
I already received Greg(Pureslab) iKon razor with the long handle tech(pix 3). I can attest to the quality of this razor. This is the best razor and gives the best shave that I have ever had. I have been posting my results in this forum as SOTD. The weight of this razor is approx 3.3 oz and length is 4". The grip is unbelievable as the knurling is very deep. You can buy from iKon razors with confidence. Also who else is building razors from scratch? Finally a razor made from 100% stainless steel.
Ten years since I bought my ikon "extended tech" handle from Greg (Pureslab). It's long out of production, and it'll be among the heirloom razor stuff long after my shaving days are over.
Re: iKon Custom Made Safety Razors
Posted: Fri Jan 04, 2019 8:39 pm
by Pauldog
What are you talking about? Shaving never stops...
Re: iKon Custom Made Safety Razors
Posted: Fri Jan 04, 2019 10:21 pm
by brothers
I'm with you Paul! That's my story and I'm sticking to it.