Hi, I am new to this so I hope I am in the right place.
I have an old straight razor with the makers stamp
CHAMPION & Co. SHEFFIELD
I can't find the name anywhere.
Can anyone help please.
can't find maker
Re: can't find maker
Welcome to SMF. I've seen razors called Champion, but not as a manufacturer - it was used by Geo. Manby & Co and B.J.Eyre & Co. However, the The Sheffield directory and guide: containing a history of the town (by Henry Blackwell, and available free on Google Books) does contain this little snippet:
No dates of operation, I'm afraid. If you feel like it, post up some photos and we'll explore a bit further.
Chris
No dates of operation, I'm afraid. If you feel like it, post up some photos and we'll explore a bit further.
Chris
"Je n'ai pas besoin de cette hypothèse."
Pierre-Simon de Laplace
Pierre-Simon de Laplace
Re: can't find maker
Hi, thanks for the reply. You have come up with the same info as myself.
I will try and sort a few photos.
thanks.
I will try and sort a few photos.
thanks.
Re: can't find maker
Hi, still no luck in finding this maker.
If the photos are not clear
CHAMPION & CO
ESTD 1780
SHEFFIELD
CORPORATE MARK
C inside a diamond
Would appreciate any help
Thanks
If the photos are not clear
CHAMPION & CO
ESTD 1780
SHEFFIELD
CORPORATE MARK
C inside a diamond
Would appreciate any help
Thanks
- Attachments
-
- DSCF6151.JPG (1.41 MiB) Viewed 7328 times
-
- DSCF6150.JPG (1.69 MiB) Viewed 7328 times
-
- DSCF6145.JPG (2.18 MiB) Viewed 7328 times
-
- DSCF6143.JPG (2.77 MiB) Viewed 7328 times
Re: can't find maker
I'd say it either can be attributed to Thomas Champion or perhaps a precursor (who may have been Thomas) of the firm Rhodes & Champion - there is an argument against this - for design reasons such a Champion would have had to separated from Rhodes as this razor is of later design). They, by the way, have a curious rationale for making framebacks other than cheapness or lack of skilled grinders:
But if Rhodes & Champion were allied in the era of framebacks, and this razor is a lot more modern than that, how come it says Champion alone? The snippet above comes from The Sheffield Directory, published in 1828. We know your razor cannot have been made before 1780, and a single glance tells us this razor was not early production. It has a normal tang rather than a stubby one. Double stabiliser so fully hollowed, and it still has the bevel on the lower part of the shank. However there are jimps on top of the shank and the spine and the edge are almost straight and parallel. Bone scales. This is a mid-century razor, probably between 1840 and 1860, and probably made by Thomas Champion, or just possibly another Champion who was once partnered with Rhodes in the frameback era, but working alone again by the time of this razor's production.
But if Rhodes & Champion were allied in the era of framebacks, and this razor is a lot more modern than that, how come it says Champion alone? The snippet above comes from The Sheffield Directory, published in 1828. We know your razor cannot have been made before 1780, and a single glance tells us this razor was not early production. It has a normal tang rather than a stubby one. Double stabiliser so fully hollowed, and it still has the bevel on the lower part of the shank. However there are jimps on top of the shank and the spine and the edge are almost straight and parallel. Bone scales. This is a mid-century razor, probably between 1840 and 1860, and probably made by Thomas Champion, or just possibly another Champion who was once partnered with Rhodes in the frameback era, but working alone again by the time of this razor's production.
"Je n'ai pas besoin de cette hypothèse."
Pierre-Simon de Laplace
Pierre-Simon de Laplace
Re: can't find maker
Hi, great information, more food for thought. Knowing the age helps.
Many thanks.
Many thanks.