So, without further ado, here is my current crop for sale:
One of my latest shop-made brushes. This one came out really nicely. The knot is TGN two band finest bulb and is set at 25mm/52mm. Test lather of this brush was amazing.
![Image](https://img1.etsystatic.com/041/0/8997494/il_570xN.579568633_hsxs.jpg)
![Image](https://img0.etsystatic.com/023/0/8997494/il_570xN.579451164_8naa.jpg)
This one is one of my personal brushes I restored for myself. This is an older celluloid shell handle. Inside the bottom part is a gypsum-like substance for weight and structure. The top part used to be rubber (I think), but is now epoxy holding down a TGN two band finest bulb knot set at 21mm/43mm. This is a fantastic small face lathering brush with a very ergonomically correct handle.
![Image](https://img1.etsystatic.com/024/0/8997494/il_570xN.577893247_b7vo.jpg)
![Image](https://img1.etsystatic.com/042/0/8997494/il_570xN.577893339_fmkh.jpg)
This one is another one of my shop-made efforts. It is made of several piece of wood and there are some interesting patterns in the way the wood was laminated. I have finished this handle with two ton epoxy for total water seal. The almost glassy finish is very thick and feels great to the touch. This is a TGN two band finest fan set at 23mm/48mm. A really wonderful handle shape that I am definitely going to reuse. Feels really good in hand.
![Image](https://img1.etsystatic.com/044/0/8997494/il_570xN.577890319_pwdk.jpg)
![Image](https://img0.etsystatic.com/018/0/8997494/il_570xN.577773898_io98.jpg)
Here is another brush I listed in my store. This one is my first attempt at resin handles.
![Image](https://img1.etsystatic.com/017/0/8997494/il_570xN.581157809_9njg.jpg)
![Image](https://img0.etsystatic.com/031/0/8997494/il_570xN.581044996_lylc.jpg)
I have created and entered into my inventory two more brushes. Both made of Dymondwood stock. They both came out to exactly the same dimensions:
Overall: 96mm
Handle: 48mm
Loft: 48mm
Knot: 24mm
I cleaned the knots out for post bloom photos.
Brush number 1
![Image](https://img0.etsystatic.com/038/0/8997494/il_570xN.581987906_847x.jpg)
![Image](https://img0.etsystatic.com/029/0/8997494/il_570xN.581987968_d6i5.jpg)
![Image](https://img1.etsystatic.com/039/0/8997494/il_570xN.582106949_f0wo.jpg)
Brush number 2:
![Image](https://img0.etsystatic.com/031/0/8997494/il_570xN.581995892_khg2.jpg)
![Image](https://img1.etsystatic.com/031/0/8997494/il_570xN.582110773_6fby.jpg)
![Image](https://img0.etsystatic.com/042/0/8997494/il_570xN.581996034_htwi.jpg)
So far this is all. I am working on more restores and a few original pieces. Stay tuned.
As you can see, I am a big fan of TGN two band badger. However, I can work with any type of knot. In fact I am also working on an Omega boar knot brush. It will have the Pro-49 knot and some sort of special handle. I can also take custom orders.
Thank you for your consideration and feedback.
--
Vladimir