Lather: fact and fiction
Lather: fact and fiction
ok, i always wondered why we would need to lather our faces with a lot of lather. i've seen pics of guys in various formats with lather that was a 1/2" thick on there faces and looked like coolwhip. now don't get me wrong. i make a lot of lather also but i wondered why put so much lather on our faces? wouldn't any lather thicker than the length of a whisker be over doing it? i've noticed in old pictures and even old movies, say from the 30's, that when guys lathered back then it looked like a soapy film over their beard. maybe the products weren't as good, or back then guys just didn't care. lately on my final touch-up pass i squeeze the brush with my fingers and apply a little lather. i move it around and it gets a thin slimy coating over my beard. it produces and excellent medium for a final easy pass. great slide and good results. just wondering if anyone has some input as to why lather needs to be put on as heavy as we tend to apply it.
pics of two very different lathers
pics of two very different lathers
Gil
futur/EJ357/ gillette redtip
iridium ,blue IP
thater, shavemac.anchorset/tgn,sr3226
dirty bird
and a prayer
futur/EJ357/ gillette redtip
iridium ,blue IP
thater, shavemac.anchorset/tgn,sr3226
dirty bird
and a prayer
- m3m0ryleak
- Posts: 1170
- Joined: Mon Nov 02, 2009 9:50 am
- Location: Central Maryland
Good question Gil, it's crossed my mind (what's left of it) as well. Someone step in if I'm wrong but it is my understanding that lather is there primarily to carry water to the whiskers. And the actual interface of blade meeting whisker is down there at the molecular level, so why the need for the "Santa Claus" beard ?. At the price of Castle Forbes (for example) that's too much ho ho money to waste.
Tony
"They say that dreams are growing wild just this side of Burma Shave" - Tom Waits
"They say that dreams are growing wild just this side of Burma Shave" - Tom Waits
Gil I don't think it takes as much as most of us put on our faces. But lets face it. Most of us indulge ourselves to the point where if a little works more can't hurt so why not? I know when I am in the woods I use a bar of bath soap and my hands to lather up. I always get a decent shave just not a decadent one. I am into that decadence part.
Dave
Hey Gil, the old barber that taught me to shave used a thin lather made from a commercial Williams type soap. They used enough lather for the job but no more, mostly to save money, what with shaves being .50 each. Of course the beard was already prepped with hot towels and the shave was quick so there was no chance of the lather drying out. these guys knew what they were about and possessed skills acquired through decades of practice.
I use a thick lather because I can. I am taking my time and the voluminous (voluptuous?) lather doesn't dry out keeping the moisture underneath against the whiskers where it counts.
Thick or thin work and the difference in cost is less than 10 cents a week.
I use a thick lather because I can. I am taking my time and the voluminous (voluptuous?) lather doesn't dry out keeping the moisture underneath against the whiskers where it counts.
Thick or thin work and the difference in cost is less than 10 cents a week.
Regards,
Squire
Squire
I'm sure when it comes to advertisements the amount of lather is excessive, to promote excessive use of the product, which increases sales.
I'm thinking the practicality of more lather is to function as a barrier to prevent rapid drying of the bubble structures underneath, the ones in contact with the whiskers and skin.
Personally, when I've been shaving for over ten minutes (most open razor shaves for me are minimum 15 minutes) my skin has absorbed a few lathers and has enough slickness that I can just splash on some water to do touch up. I like to keep the lather on my face, even parts of my face that have already been "cleared" in a given pass in order to keep it hydrated. Even a thinner layer of lather, if the soap or cream has structural stability, seems to do the trick. I think it's more marketing and the suggestibility of the common cattle that passes for "men" these days.
Hmph.
I'm thinking the practicality of more lather is to function as a barrier to prevent rapid drying of the bubble structures underneath, the ones in contact with the whiskers and skin.
Personally, when I've been shaving for over ten minutes (most open razor shaves for me are minimum 15 minutes) my skin has absorbed a few lathers and has enough slickness that I can just splash on some water to do touch up. I like to keep the lather on my face, even parts of my face that have already been "cleared" in a given pass in order to keep it hydrated. Even a thinner layer of lather, if the soap or cream has structural stability, seems to do the trick. I think it's more marketing and the suggestibility of the common cattle that passes for "men" these days.
Hmph.
Lover of cold, hard steel.
Interesting question Gil. By accident, I face lathered with a completely soaked brush and had not squeezed or shaken it out.
I had smeared some T&H 1805 on my face and took the sopping wet brush directly to my face. There was lather everywhere of course, including running down on my chest, but I continued to work it. Eventually it started to thicken, but it would never win any awards as to quality. Looking at it, I said too thin, too many large bubbles, need more product.
Nonetheless, I shaved with it and had a terrific shave. I think there is something to it and plan to try it again.
I also recall a jingle from a very old shaving commercial, something along the lines of "The Wetter The Shave, The Better The Shave".
Prior to this I would always strive for a firmer lather, almost like yogurt.
Try it and see what you think.
I had smeared some T&H 1805 on my face and took the sopping wet brush directly to my face. There was lather everywhere of course, including running down on my chest, but I continued to work it. Eventually it started to thicken, but it would never win any awards as to quality. Looking at it, I said too thin, too many large bubbles, need more product.
Nonetheless, I shaved with it and had a terrific shave. I think there is something to it and plan to try it again.
I also recall a jingle from a very old shaving commercial, something along the lines of "The Wetter The Shave, The Better The Shave".
Prior to this I would always strive for a firmer lather, almost like yogurt.
Try it and see what you think.
George aka Hex
My reasons for thicker (not denser/dryer) lather:
1. Feels good.
2. Insulates and holds in body heat against the natural cooling effect of evaporation.
3. Stays wetter longer than a thin layer.
I do frequently use a fairly runny lather for any touch-up work, which is usually pretty quick work, so I'm not worried about sacrificing any of the above.
1. Feels good.
2. Insulates and holds in body heat against the natural cooling effect of evaporation.
3. Stays wetter longer than a thin layer.
I do frequently use a fairly runny lather for any touch-up work, which is usually pretty quick work, so I'm not worried about sacrificing any of the above.
Relax...Take it easy...Enjoy the lather
Dennis
Dennis
- i_shaved_something
- Posts: 1557
- Joined: Sat Oct 27, 2007 9:56 pm
- Location: Northern Virginia, USA
I have only recently, just maybe 2 months or so started to use mostly only paint brush style lathering on my face. It is not as thick lather and as "santa claus" looking as as when I used to smash the brush in my face lathering.
But, I feel this way lathering gives me more good supporting lather. I don't get it very wet either, just one or 2 dips on brush badger brush hairs to sink.
This paint brush style works also on my boar brush very well.
As others have told, I think it is more to how your lather works than how thick it looks.
But, I feel this way lathering gives me more good supporting lather. I don't get it very wet either, just one or 2 dips on brush badger brush hairs to sink.
This paint brush style works also on my boar brush very well.
As others have told, I think it is more to how your lather works than how thick it looks.
Jarmo
- Straight Arrow
- Posts: 1259
- Joined: Wed Oct 17, 2007 7:45 pm
- Location: NJ
Gil,
Make lather with your brush from either soap or cream, then simply apply it to your face in brush like strokes, once a decent amount has been applied rub it in with your hands. The hand lathering seems to help thicken and cream out (take the air out of) the lather making for a nice dense layer which I find shaves quite nicely.
It's a bit messy but after watching countless clips of barbers shaving customers on youtube and perusing old barbering manuals I do feel the method works.
Make lather with your brush from either soap or cream, then simply apply it to your face in brush like strokes, once a decent amount has been applied rub it in with your hands. The hand lathering seems to help thicken and cream out (take the air out of) the lather making for a nice dense layer which I find shaves quite nicely.
It's a bit messy but after watching countless clips of barbers shaving customers on youtube and perusing old barbering manuals I do feel the method works.
Good shaving,
Gary
Gary
Brushless shave creams are by nature going to be thinner than the lather made with a big badger brush. Even the most expensive "big name" shaving creams that most people believe somehow require being applied with a brush can readily be used without a brush: i.e.: without a lather, unless the thin but rich lather produced by rubbing the hands together then applying it to the face before shaving. That's what I mean when I say brushless. From Castle Forbes to Proraso to Domenico Caraceni, they're all good with or without a brush. I just happen to use a brush about 99.5 percent of the time, because I can! The thick lather is just a beautiful side benefit.
Gary
SOTD 99%: Monday, Wednesday, and Friday, soaps & creams, synthetic / badger brushes, Colonial General razor, Kai & Schick blades, straight razors any time, Superior 70 aftershave splash + menthol + 444
SOTD 99%: Monday, Wednesday, and Friday, soaps & creams, synthetic / badger brushes, Colonial General razor, Kai & Schick blades, straight razors any time, Superior 70 aftershave splash + menthol + 444
I was reminded of this thread when I watched a clip from the old Cosby Show. Theo is ready for his first shave an appears with a whole can of foam on his face and Cosby, on handing him the DE razor for the shave, says: "Don't lose it in there".
Sorry, but I can't seem to find the clip on YouTube.
Sorry, but I can't seem to find the clip on YouTube.
Eric
- Quarterstick
- Posts: 342
- Joined: Fri Jul 29, 2011 2:09 pm